1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

RF issues with Henderson Spreader

Discussion in 'Truck & Equipment Repair' started by tastebeer, Dec 16, 2013.

  1. tastebeer

    tastebeer Member
    Messages: 82

    I have been having issues with the RF system on an 8ft Henderson FSP stainless spreader with a Briggs engine. The spinner will run but occasionally will shut off as if the RF system is loosing communication. When this happens, I tap on the RF control box and the problem goes away for a while. Has anyone else had similar glitches with the Henderson RF system? If so, what is the problem and how to eliminate. This unit is 3yrs old and well maintained.
  2. LON

    LON Senior Member
    Messages: 749

    There was an issue at one time with the antennae height and miscommunication from it. Has since been fixed (may have been all new stuff, don't quite remember). Call Henderson 800-359-4970 and asked for Kevin or Shane in service.