1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Replacing polycarb on plow

Discussion in 'Residential Snow Removal' started by ramp, Jan 18, 2012.

  1. ramp

    ramp Member
    Messages: 37

    I'm stripping the metal to the plow. When it's all painted and ready for assembly, is there any caulking that goes between the polycarb and the metal bracket? When I took it apart there seemed to be an excess of paint or caulking.
  2. bliz&hinikerDLR

    bliz&hinikerDLR Senior Member
    Messages: 553

    never used any caulk on the 2 or 3 i replaced
  3. ramp

    ramp Member
    Messages: 37

    OK, this will be my first.
  4. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    No caulk.l You want the poly to move freely