1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

replacing EBCM?

Discussion in 'Chevy Trucks' started by AintNoFun, Mar 16, 2006.

  1. AintNoFun

    AintNoFun Senior Member
    Messages: 175

    has anyone replaced the EBCM (electronic brake control module??) in any of their chevys. my truck was at the dealer for the ABS light being on among other things. They said the EBCM went bad in the truck and its $700 to fix. I've found the EBCM online for around $300 just curious if i need a computer or something to wipe out the old codes or is this something i just pop in? thanks
  2. sonjaab

    sonjaab PlowSite.com Addict
    Messages: 1,425

    AINT..............If its the troublesome ABS computer (located on
    the frame rail) $700 or more is about right for a replacement unit
    You could just pull the fuse and have NO ABS..................

    There are a couple places that rebuild your ABS unit for $150+ bucks.
    I have seen posts from folks on a few GM truck sites that have done
    this instead of spending the $700 plus for a new unit................

    Interested? Will dig up the info. and post if you are...................geo
  3. sonjaab

    sonjaab PlowSite.com Addict
    Messages: 1,425

    AINT.........This guy advertises on fleabay under ABS modules.
    Check ad for full details and pics................
    $150 plus shipping Contact him: gavincurtis@yahoo.com

    Found at fullsizechevy.com
  4. AintNoFun

    AintNoFun Senior Member
    Messages: 175

    thanks for the info, im gonna fire that guy an email.. thanks again
  5. scottL

    scottL PlowSite.com Addict
    Messages: 1,613

    30 amp fuse for ABS == pulling it is happiness!

    No more costs and the brakes work fine, even respond better! ( '97 K3500 )
  6. letsgetplowed

    letsgetplowed Junior Member
    Messages: 7


    Recently had my 01 yukon at the delaership for the ebcm, mechanic told me same thing, unplug the fuse, and will work fine. 98 silverado does the same thing, but yukon was under warranty so had them take care of it, wifes vehicle, thank goodness for warranties, lol.