1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Repair or Replacement of Primer on Toro CCR2000

Discussion in 'Residential Snow Removal' started by jehl1, Apr 19, 2008.

  1. jehl1

    jehl1 Junior Member
    Messages: 1

    I have a 14year old Toro CCR2000 Snowthrower. While preparing for summer storage, I noticed the rubber cover/boot for the Primer was torn and if there was a "bulb/part" under the rubber cover, it is now missing. However the machine started with Choke pulled out and I was able to run the little bit of gas off. My question is:

    1. Will I need to replace the Primer before use next winter?
    2. If so, is this a simple repair most homeowners can complete?
    3. If not, what can I expect to pay for this type of repair?

    Any other words of wisdom would be appreciated. Thanks for your help!
  2. padec21

    padec21 Member
    from ct
    Messages: 63

    rubber primer bulb is around $5. white plastic thingy rubber goes on is about $5. more than likely the white plastic thingy will break when you try to take it off so pick one up.. 5 min. DIY fix.