1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Relay Clicks

Discussion in 'Meyer / Diamond Products Discussion' started by Scottscape, Feb 1, 2008.

  1. Scottscape

    Scottscape Senior Member
    Messages: 662

    I hit the up switch and nothing but the relay clicks, well it was all rusted so I assumed that was it. Well it wasn't?
  2. KGRlandscapeing

    KGRlandscapeing 2000 Club Member
    Messages: 2,660

    check the A coil and see if u have juice going to the motor
  3. f250man

    f250man PlowSite Veteran
    Messages: 3,124

    I was having the same problem with mine to. I checked all the wires and coils and everything worked with jumper cables hooked up so I put it all back together and it worked. then the next day it wouldn't lift so I opened the hood and checked the wire again and the end fell off at the solenoid. So I had to repair it. So you might want to check it.
  4. nbenallo33

    nbenallo33 Senior Member
    Messages: 826

    sounds like the solenoid to me
  5. Scottscape

    Scottscape Senior Member
    Messages: 662

    pretty sure it might be the solenoid. I removed the pump attached the wires to it from another set up. worked fine. Solenoid im pretty sure is bad.