1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Rebuild or replace my steering gear?

Discussion in 'Chevy Trucks' started by 3/4tonTodd, Nov 30, 2000.

  1. 3/4tonTodd

    3/4tonTodd Member
    Messages: 63

    I was reading some older posts and none of them spoke kindly of a reman steering gear. I need to do something with mine, so what do I do if I avoid the reman gear? Rebuild the old one? From what I understand, there are a lot of things that need to be set up just right inside those things. In other words, it's not just something you can throw together.

    Working in an auto parts store, I can get a reman gear for about $130. Not sure what the rebuild kit is.

    So do I rebuild or replace?


    btw...I have a 76 K20 with a 350
  2. Motoman69X@aol.com

    Motoman69X@aol.com Member
    Messages: 37

    I got a Remanufactured one on my k-20 works great, my uncle rebuilt his and it works but not that big of and improvment, go through Chevy it may be a little more But I think its worth it.
  3. Chuck Smith

    Chuck Smith 2000 Club Member
    from NJ
    Messages: 2,317

    I got a used one from a junk yard, I recommend you do the same. HUGE difference between a reman one.... My original one lasted 18 years, and 130,000 miles. The reman one I got lasted about 3 years, and less than 10,000 miles. Why? The seal at the input shaft started leaking PS fluid BAD. The shaft was so rusty, replacing the seal was not an option.

  4. bandit_36

    bandit_36 Junior Member
    Messages: 26

    steering gear

    Chuck is right about trying to find a good used one. Gm doesn't make a reman. steering gear that I know of & a new one from GM will run you anywhere from $350 to $600 depending on the year,make & model. You can rebuild it youself for a little less but if your not sure what your doing,don't attempt it. I've always said never mess with steering or brakes unless you know what your doing it's not worth your life or someone else's.
  5. bandit_36

    bandit_36 Junior Member
    Messages: 26

    new steering gear

    I think I may have the steering gear you need. If you're intrested E-mail me. I took it off a truck because the service manager made me. Only to find out the customers ball joints where bad.
  6. 3/4tonTodd

    3/4tonTodd Member
    Messages: 63

    Thanks for all the input on this.

    I'm kind of in a holding pattern at the moment. My truck needs a bunch of work and I'm trying to figure out if I would be better off moving to a newer vehicle, or at least one that doesn't need so much.

    In any event, the steering gear I can get through work has a lifetime warranty on it (not counting my time and trouble if I do have replace it again!)

    Thanks again