1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Quick E60 non H question

Discussion in 'Meyer / Diamond Products Discussion' started by Powastroka, Nov 10, 2010.

  1. Powastroka

    Powastroka Member
    Messages: 84

    What is the max lift on my E60 (center hole of lift ram to top cap of pump)?

    I mad a couple of height changes to my truck and may need to adjust the stops.

  2. Powastroka

    Powastroka Member
    Messages: 84

    In case anyone saw this post and was wondering the same.

    From Smith Bro's. : The E60 can go all the way up to where it stops on its own. You have to absolutely make sure that the pump pressure is set at a max of no more than 2500psi. Any more and you risk doing both cracking the top cap (I have done), or breaking the whole pump. (I have also done)

    Also from Smith Bro's. "The E60 is a beast of a pump, capable of over 5000psi".