1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

question on mvp ultramount install

Discussion in 'Western Plows Discussion' started by dupupp, Feb 1, 2009.

  1. dupupp

    dupupp Member
    Messages: 46

    how did you guys who have installed your mvp get the wire harness through the firewall on the truck-on my harness the plug for the push button controler is almost a inch and a quarter round-do i need to drill that big of hole to get throught the firewall? any secrets i am missing here? also if i have to drill were did you guys drill for a 05 2500hd chevy silverado? thanks
  2. StathemLawncare

    StathemLawncare Member
    Messages: 37

    i put mine on 03 2500 dmax, I just used a big rubber plug already there and just cut a slice in it. And then just squeezed it through. I think it was around where the gas pedal was a little higher.
  3. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    thats what id do also. chevy has a big rubber boot already there.
  4. Mowman62531

    Mowman62531 Member
    Messages: 98

    Yep! Slice the boot and route your wiring harness through.