1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

question about strobe lights

Discussion in 'Equipment, Tools & Vehicle Pictures' started by mikemac, Dec 12, 2003.

  1. mikemac

    mikemac Member
    from ma
    Messages: 31

    how exactly do you run wires for hide way strobes and a mini light bar in your truck?
    i'm looking to put a 4 head hide away system in and i am trying to get a feel for the difficulty.
  2. kipcom

    kipcom Senior Member
    from Indiana
    Messages: 455

    Mike,,,,, it is not hard at all if you have some 12v DC experience. Most kits do not require any cutting splicing. Keep the control pack inside the cab and all 4 cables will go out thru a grommet in the firewall then follow the other wiring and just cable tie to those. You have to drill a hole in the lens base for each strobe head to fit into. Install an on/off switch and connect to the battery( make sure you install a fuse ) and then test.