1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Quad burn headlight conversion

Discussion in 'Chevy Trucks' started by sabres07, Feb 5, 2009.

  1. sabres07

    sabres07 Senior Member
    from buffalo
    Messages: 110

    Thanks to B&B and his simple instructions, I converted my 2005 Chevy 1/2 ton and my boss plow over to quad burn headlights....it took about 2 minutes of my time and one 40 cent diode from radio shack. Great tip, B&B!!!!
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Funny how a .40 diode will allow you to see what your about to run into. :D

    Glad you liked the simple little mod Bruce. :waving:
  3. legendbridges

    legendbridges Junior Member
    Messages: 14

    where are these simple instructions please
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    In your email inbox if you provide an address.
  5. fakemam

    fakemam Junior Member
    Messages: 20

  6. wirenut

    wirenut Senior Member
    from nh
    Messages: 529

    hey mods make a sticky on this .....
  7. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Like I've mentioned before in the past just to clarify....

    This specific "easy mod" only works on the '03-'07 classic body GM's.

    The '99-'02's can be done as well but they need a little different method.

    Same with the '88-'98..they need a generic universal relay added to make it work. Still an easy mod though regardless.

    NICHOLS LANDSCA PlowSite Veteran
    Messages: 4,362

  9. NootDogg

    NootDogg Senior Member
    from WI
    Messages: 113

  10. lilweeds

    lilweeds PlowSite.com Addict
    Messages: 1,178

  11. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Lets do it this way...email me with your truck application so I can get the needed diagrams out to you guys. Be sure to specify which truck you need it for..

    Also, these mods are truck specific but NOT plow specific...doesn't matter what plow your running. And these mods will give you dual burn on BOTH the truck AND the plow.

  12. xbl003x

    xbl003x Member
    from PA
    Messages: 44


    Messages: 65

    I would like a set too! 1996 GMC Sierra 2500 already set up with Painless Wiring light relay kit so all four lights work when the high beams are on. Please E-mail them to me at kje@fuse.net . Thanks,Keith
  14. CityGuy

    CityGuy PlowSite Fanatic
    Messages: 17,220

    Hey B & B will that work on an 08 chevy 6.0
  15. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Gotta specify what truck...
  16. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Then your plow lights should already be the same way.
  17. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Afraid not...different wiring setup. Light are controlled directly through the BCM on the new body truck so these mods aren't compatible.

    Messages: 65

    B & B , My Headlights don't work when my Western Ultramount is hooked up, only the plow lights and only has one on each side. I guess the quad headlight set up is for without the plow and I mis-understood the question. I thought it would allow the headlights to work with the plow attached. Thanks for the fast reply, Keith