1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

pulling half shaft

Discussion in 'Chevy Trucks' started by CSC Contracting, Mar 11, 2011.

  1. CSC Contracting

    CSC Contracting Senior Member
    Messages: 105

    Can I pull my half shaft out of the bearing/hub and still drive the truck? or is it a part that must be in to drive. Thanks

    NICHOLS LANDSCA PlowSite Veteran
    Messages: 4,362

    You should be fine, you will trip the ABS light
  3. Mxrider069

    Mxrider069 Member
    Messages: 85

    Absolutley not, The half shaft passes threw the bearing and when you tighten the axle nut it holds it all together. You can drive it but you WILL trash the bearing and it will be very dangerous.
  4. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    he can drive it yes. but if he makes it out the driveway or more than a mile or so is a whole other thing.
  5. CSC Contracting

    CSC Contracting Senior Member
    Messages: 105

    Thanks guys. I will put it all back together.
  6. Mxrider069

    Mxrider069 Member
    Messages: 85

    Drive it and move it are two totally different scenarios..Lol i wouldnt pull it outta my garage
  7. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Good idea.....
  8. plowin-fire

    plowin-fire Senior Member
    Messages: 220

    Why would you want to remove it anyways?