I have a 1999 western pro plow. My proplem happend right before our last storm. When I hooked up the plow and hit the raise button the plow angled right and stayed right. No matter what button I hit on the remote the plow still only goes right. Has any one ever had this proplem or knows what may cause this. Thanks for your help.
-
Vaccine Priority For Essential Snow & Ice Workers?
Concerned about COVID-19 and/or potential labor shortages? Click here for a letter to health departments from SIMA emphasizing your priority for the COVID vaccine as an "essential" worker.
problems with a western plow
- Thread starter dtm
- Start date
Mike Nelson
Senior Member
- Location
- Naperville IL
dtm,
It sounds like a faulty ground,might try some electric spray and replug.Just my 2 cents
It sounds like a faulty ground,might try some electric spray and replug.Just my 2 cents
PINEISLAND1
PlowSite.com Veteran
- Location
- Western Michigan
dtm-
I have the same plow, same year. Every time there is a problem like that it has been electrical connections. As was said above, re-do all connections, hit em good with dielectric grease, then go from there. It may be that simple.
I have the same plow, same year. Every time there is a problem like that it has been electrical connections. As was said above, re-do all connections, hit em good with dielectric grease, then go from there. It may be that simple.
wyldman
Member
- Location
- Brampton,Ontario,Canada
Had one last week,same problem.Was a tiny metal shaving stuck in one of the valves.Took everything apart,blew it all out and reassembled and it works great.
DanG
Senior Member
- Location
- Rensselaer,NY
If you go to the western web site they have trouble shooting charts there. http://www.westernplows.com
I had the same problem with mine and like the others said check your connections first.
The trouble charts helped me out.
Dan
I had the same problem with mine and like the others said check your connections first.
The trouble charts helped me out.
Dan