Snow Plowing Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Just a note to thank the guys out there that offered their advice. I replaced my Arctic under hood pump and probelms are solved. My old pump was only giving 1200 psi, ( could only get 1700 psi with reg pegged out - maybe good for a spare ?). Installed new pump and set up at 2200 psi. What a difference - raise and angle times twice as fast. On the road again !
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top