1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Pro Wings

Discussion in 'Truck & Equipment Repair' started by B&K LawnCare, Oct 30, 2005.

  1. B&K LawnCare

    B&K LawnCare Member
    Messages: 68

    I just got pro wings for my western 7' I drilled my holes in the right spot, but it just wont line up right. any Ideas?
  2. Ian

    Ian Member
    Messages: 96

    They go on pretty easily but may need a little adjusment. I marked and cut the holes in the face of the blade with a plasma. I clamped on the pivot brackets with some vise gripes and or whatever clamps were handy. Adjusted them slightly to get the wing to swing without binding and drill away. I ended up with holes slightly larger than specified because you need room for the stud to move into and out of the hole on the face of the blade smoothly.