1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

pp not angling right

Discussion in 'Blizzard Plows Discussion' started by sven1277, Jan 25, 2012.

  1. sven1277

    sven1277 Senior Member
    Messages: 498

    8611lp. The pump is getting power. I switched out the s4 with the s10 magnetic switch to see if it was bad. The angle function on the controller worked the wing. Not what I was expecting. The s3 and s4 solenoids appear clean. Could it be the multi pin connector? The pins all look good.
  2. bliz&hinikerDLR

    bliz&hinikerDLR Senior Member
    Messages: 553

    Putting the S4 coil on the wing valve confirmed that the coil is working and the problem is not electrical. Next try swapping the valves in S3 and S4. If the plow will not angle left but will angle right, you have a bad valve.
  3. sven1277

    sven1277 Senior Member
    Messages: 498

    Thanks, that was my next thought too. I switched trucks and harness to 100% isolate the problem to the plow. It is.