1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Pop sound- no drive!

Discussion in 'Ford Trucks' started by plow/truck, Sep 22, 2007.

  1. plow/truck

    plow/truck Member
    Messages: 57

    Our driver was watering the road, he was backing up a small hill 100ft (steep) the truck was full of water & in low range. A car approached while backing up, so he pushed in the clutch in and rolled down the hill (forward while in reverse) then a pop was heard.
    Now the truck has do drive.
    After looking at the truck, it is possible to shift gears while it’s running with out the clutch! I’m thinking something is wrong with the clutch itself.
    Am I correct with this assumption?
  2. dilligafdog

    dilligafdog Member
    Messages: 53

    sound's like you might of snapped the input shaft. if something happened to the clutch it would always engage and stay engaged, unless the pressure plate took a crap.:mad: :cry: :salute:
  3. Gicon

    Gicon Senior Member
    from MA
    Messages: 989

    or broke a U-Joint
  4. Gicon

    Gicon Senior Member
    from MA
    Messages: 989

    Teach your driver where the brake is and inform him that it works WITH the clutch.