1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Poly Shield Install

Discussion in 'Commercial Snow Removal' started by SCFALL, Oct 21, 2003.


    SCFALL Member
    Messages: 47

    Just picked up a poly Shield for my Meyers, It came with the bolts for across the top and a tube of clear silicone. The directions say to bolt it on then shoot a bead of silicone around the edges to seal it. What I am wondering is should I use an adhesive of some type ( silicone, liquid nail, contact cement) on the moldboard In at least in a half a dozen spots or just follow the directions? Thanks Scott
  2. vector6

    vector6 Senior Member
    Messages: 150

    you may want to dis-assemble it in the future.. :dizzy:

    if it were mine... i'd just seal the outside edges

    SCFALL Member
    Messages: 47


    Good point, Thats what I'll do. Thanks Scott