1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plowfeet for a Snobear

Discussion in 'Residential Snow Removal' started by CruZer, Mar 27, 2007.

  1. CruZer

    CruZer Junior Member
    Messages: 20

    I made these shoes for my snobear and have been meaning to post pix. I've used them all winter and have not had a problem with them. I took quarter inch steel sheet,cut a 4 inch circle and used a hydraulic press to dimple them in the middle.(A little torch heat helps ,too ).
    Then I welded threaded 5/8 inch rod onto the shoe and made the mounting bracket. You have to get the angle just right to have the shoe sit flat on the ground when the plow is down.Add a couple of washers and nuts fro heighth adjustment and you're ready to plow.

  2. AbsoluteH&L

    AbsoluteH&L Senior Member
    Messages: 573

    nice work!!