1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

plow wont angle

Discussion in 'Fisher Engineering Discussion' started by slappy, Jan 12, 2006.

  1. slappy

    slappy Junior Member
    from mass
    Messages: 3

    i have a elec 9'mm it wont angle something is stoping it ,the cylinders try to push the blade but cant
  2. wickedcarpenter

    wickedcarpenter Member
    Messages: 36


    It's the female coupler on the hose. Been there and done that after taking eveything apart the last thing I swaped was the fitting.
    Easy fix!
  3. ticki2

    ticki2 Senior Member
    from NH
    Messages: 175

    Mine did that today , cleaned the connector plug and worked fine all day . Thats on elec/hydraul MM.
  4. justme-

    justme- 2000 Club Member
    Messages: 2,138

    ALSO check your highway chain. If it's too loose it can drop down far anough to jam between the plow and the lift frame preventing angling. I added a small bungie cord to the center of mine to hold it up.
  5. wirenut

    wirenut Senior Member
    from nh
    Messages: 529

    check grounds