1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plow sticks right

Discussion in 'Meyer / Diamond Products Discussion' started by broncscott, Dec 16, 2009.

  1. broncscott

    broncscott Senior Member
    Messages: 113

    A Friends Meyer plow when angled right gets stuck ad he has to bump a curb with the left side to free it up.Hes running E60s and switched to the spare pump but no change. Any suggestions? Thanks, Scott
  2. poncho62

    poncho62 Senior Member
    Messages: 431

    Sounds to me like he has bent a cylinder or something on the "A" frame.
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Poncho's on it, it's probably something mechanical. Bent cylinder, worn pivot bolt/hole, bent, sector, A-frame or stop...or a stop missing entirely.

    Have him connect the hoses together and FULLY angle the plow by hand reaching both stops. The issue should turn up quite quickly.

    Could also be a bad quick coupler on the plow side.
  4. broncscott

    broncscott Senior Member
    Messages: 113

    He did tell me he welded a stop on the right side that limited the angle and it made no difference
  5. Robhollar

    Robhollar Senior Member
    Messages: 766

    If the couplers are hard to uncouple then you have a bad coupler. If its bent then lift the blade plug your lines together and move the blade by hand. If it moves then your not bent...Rob
  6. broncscott

    broncscott Senior Member
    Messages: 113

    Changed couplers and it works properly. Thanks, Scott