1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plow off of 94 f240 onto 95 chevy blazer s10?

Discussion in 'Introduce Yourself to the Community' started by HellaFlushJR, Dec 27, 2010.

  1. HellaFlushJR

    HellaFlushJR Junior Member
    Messages: 13

    Hey everyone, I just discovered this site. But I been plowing for 2-3 years now and my truck this winter finally fell on its face. Now what I want to know is, can I remove the plow frame off of my 1994 ford f250 onto my 95 Chevrolet blazer s10? Or should I just consider buying a whole new plow system? I dont know to much about the whole frame and all that so im really a newbie when it comes to this. And also, can someone give me links on where to buy new plow systems for my blazer? and the cost for the entire equipment? Ok thank you everyone!
  2. Banksy

    Banksy PlowSite Veteran
    Messages: 3,113

    Can't be done. Two completely different trucks.
  3. Snowzilla

    Snowzilla Senior Member
    from Iowa
    Messages: 397

    What brand of plow is on it? Width? If it is a full size plow (I assume it is) the S10 isn't going to handle it. But if it is a Snowbear homeowner plow it should be swappable with a new frame bracket. More info needed.
  4. South Seneca

    South Seneca Senior Member
    Messages: 474

    You would be better off to find another F250 to put the plow on. Even then there are things that change year to year, but at least the plow should be the right size.
  5. HellaFlushJR

    HellaFlushJR Junior Member
    Messages: 13

    I'm not sure on the plow size, but it's a fisher brand and it looks like it would be bigger then my blazers front end. Do you guys happen to know any reasonable sites or places where I can just buy a whole new plow equipment for my blazer s10? And I would just get a replacement truck to swap my old plow system on, but every ford truck I get that's a older models always ends up with a problem every fall before winter hits. =(

    STIHL GUY Senior Member
    from CT
    Messages: 663

    check craigslist for used plows...if you spend a little more on a newer truck its gonna be more expensive to begin with but it will be more reliable and end up making you more $ in the end
  7. MattR

    MattR Senior Member
    Messages: 218

    An older truck that was maintained well will hold up just as well if not better than a new one. Plus the older one will be paid off faster. You just have to buy smart and check everything over.
  8. Cmbrsum

    Cmbrsum Senior Member
    Messages: 141

    An S-10? Seriously? You thought your ford fell apart fast. Buy a real truck or don't plow. I would almost think an S-10 on the road with a plow on it would be a danger to all around it.
  9. PowersTree

    PowersTree Senior Member
    Messages: 586

    CMB, only dangerous when trying to fit a full size plow to it. They make plows for s10.
  10. HellaFlushJR

    HellaFlushJR Junior Member
    Messages: 13

    Yeah I'm checking craigslisy now! Hopefully I can find something good! But I don't believe adding a plow to a blazer is anyway dangerous. I only plow my long driveway and relatives driveways, but there's YouTube videos of a blazer plowing perfectly fine too.
  11. Snowzilla

    Snowzilla Senior Member
    from Iowa
    Messages: 397

    The Western Suburbanite or Fisher Homesteader (same plow) is compatible with a '95 S10.

    You can find them online from sponsor ads above, like,

    These are light duty downsized plows designed for home use but I know a guy who uses this exclusively for clearing his apartment complex and a few others for the past 3 years on an S10 Blazer.

    Snowdogg makes a heavier steel plow to fit the S10 truck, you may check into if it will fit the blazer. The Snowdog MD. http://www.snowdogplows.com/

    Central Parts sells Snowdogg also. If you order online you will have to install yourself & figure in the shipping. If you prefer not to do any of the install you may be just as well buying through a local dealer.
  12. bigthom

    bigthom Senior Member
    Messages: 105

    I hopes its a 8' plow and I wanna see the s10 hold that! Lmao sorry but dnt think it is a good idea
  13. linckeil

    linckeil PlowSite.com Addict
    from CT
    Messages: 1,272

    i have a conventional western plow frame that came off a s10 blazer. i don't know what year blazer, but being western didn't offer conventional frames after 1994, its gotta be off a pre 1994 blazer. it may fit your 95.
  14. HellaFlushJR

    HellaFlushJR Junior Member
    Messages: 13

    What's your location and how much?
  15. hydro_37

    hydro_37 PlowSite Veteran
    from iowa
    Messages: 3,790

    Blazer will plow snow...just not as well as an F250 will
  16. HellaFlushJR

    HellaFlushJR Junior Member
    Messages: 13

    Hydro that's very true and logic!
  17. Snowzilla

    Snowzilla Senior Member
    from Iowa
    Messages: 397

    Yes, the S10's actually have a pretty stout frame from what I've seen.
  18. linckeil

    linckeil PlowSite.com Addict
    from CT
    Messages: 1,272

    i'm in newtown ct. judging by your location description, i'm guessing you're by the casinos?

    do you know what the year ranges are for the plow frames on the s10's? i can try to get some pics for you, but the frame is back in the woods under 18 inches of snow right now.

    its just the frame that mounts to the truck. i'd let it go for somewhere around $150-$200.
  19. HellaFlushJR

    HellaFlushJR Junior Member
    Messages: 13

    Omg I'm in Danbury,CT!!! Lol soo would the frame pull my fisher plow up for mean time? And how hard is it to install the frame into my blazer?
  20. HellaFlushJR

    HellaFlushJR Junior Member
    Messages: 13

    Is there a way you can help me install it if I do pick it up from you? I'm exit 6 on I-84 west! Basically about 10mins away from you!