1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

plow frame directionals

Discussion in 'Fisher Engineering Discussion' started by earl964, Oct 1, 2007.

  1. earl964

    earl964 Member
    Messages: 54

    I have a mm1 SEHP, when I install the plow and plug in the wires the plow head lights come on put the directionals dont work I have checked the bulbs and they are fine. Any Help with this would be great
  2. Brian Simmons

    Brian Simmons PlowSite.com - Sponsor
    Messages: 196

    The plow turn signals run directly of the vehicle turn signal circuit. Did you verify that the spliced connections are good? The bulb housing is grounded by a black wire on the backside and the 12 volts comes directly from the turn signal wire when the turn signals are activated.
  3. earl964

    earl964 Member
    Messages: 54

    I had traced the wires and found two bad connections on the purple wires . redid those and everything works fine now Thanks for the reply
    Semper Fi