1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Plow blade not leve

Discussion in 'SnowDogg Snow Plows' started by ddiskant, Jan 7, 2011.

  1. ddiskant

    ddiskant Junior Member
    from NJ
    Messages: 8

    Any suggestions on how to remedy plow blade not being level when angled ? It lifts up about an inch and a half to the side I am angled at.
  2. JohnnyU

    JohnnyU 2000 Club Member
    Messages: 2,040

    Your truckside mount is too high, causing the a-frame to not sit level. This causes the trailing edge of the plow to lift off the ground and wear the edges in a smile.

    Lower the truck-side mount, or the front end of your truck.
  3. hedhunter9

    hedhunter9 Senior Member
    Messages: 212

    I noticed the newer MD mounts call for 9.5 inches to the mt bar, while the old ones said 8 inchs.
    Did they do a redesign somewhere ? and can the older ones be modified to get the extra clearance ?