1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Pistol Grip for E-57

Discussion in 'Meyer / Diamond Products Discussion' started by 33StackD, Jan 12, 2011.

  1. 33StackD

    33StackD Junior Member
    Messages: 3

    I purchased a Meyer Pistol using it on my E-60 pump. It worked intermittently then stopped. I switched to an E-57 and found I needed a diode from the solenoid white wire to a ground source. I did that and nothing worked. I cut the wire and only my pad would work NO pistol.
    Anybody have a fix. Meyer rep said the pistol grip are lower voltage and thats the problem.
    Spent 200 + us currency on this thing and can't use it.

    Would appreciate any assistance
  2. dlcs

    dlcs 2000 Club Member
    Messages: 2,160

    Do you have the diode wire reversed?
  3. 33StackD

    33StackD Junior Member
    Messages: 3

    The meyer sheet calls for an end to be connected to the stud with the white wire and to the bolt which grounds to the chasis. My solenoid is mounted to the side of my truck by my air filter
  4. 33StackD

    33StackD Junior Member
    Messages: 3