1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

OLD st 90 control change e47

Discussion in 'Meyer / Diamond Products Discussion' started by welj31, Jan 31, 2009.

  1. welj31

    welj31 Member
    Messages: 58

    I have a old st 90 engine drive pump and push/pull rod controls
    i want to change the controls over to a more user friendly type
    I was told a e47 could help to do this
    Any one have more info on how to do this and parts needed?
    I seen on ebay a control pad with push buttons are all e47 the same?
  2. 04sd

    04sd Senior Member
    from pa
    Messages: 266

    You need an E47 pump, either dual toggle switches or a SlikStik switch, and a wire harness for whichever type switches you get. Those are the main things, you'll also need some battery cables and a motor solenoid but you can get those at any auto parts store.

    Here is the E47 manual... http://www.meyerproducts.com/upload/forms/1-562%20R16.pdf
  3. welj31

    welj31 Member
    Messages: 58

    Thanks this helps