1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

ok, first plow, need some good advice

Discussion in 'Introduce Yourself to the Community' started by catzr440sp, Aug 25, 2013.

  1. catzr440sp

    catzr440sp Member
    Messages: 36

    So, I just bought a fisher mm2 plow, used, and I bought all the wiring off eBay. I hooked all the wiring up today, pretty sure I plugged everything in properly, and I can't get the fish stick controller to turn on? Is there something else I need to do?? I'm using a used solenoid,but I have a new one on its way, could that be the issue? Also my drivers side low beam headlight is out, when I change the number 3&4 plugs around, the pass. Side low beam goes out?? Bad isolation module maybe? I do not have day time running lights, and was told I didn't need to splice into my turn, parking light wires, is that correct? Sorry for all the questions, just would like to get it all figured out soon, thanx in advance!!!
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,392

    Yea you need to splice into your tks parking and turn lights
    Did you look on fishers website for the wiring diagrams??
    The solenoid has nothing to do with the controller not turning on