1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

OEM Super Duty Mirrors

Discussion in 'Ford Trucks' started by Dan85, Nov 24, 2010.

  1. Dan85

    Dan85 Senior Member
    Messages: 670

    Are all Super Duty Mirrors ('08-10) with the power, heat, and turn signal option the same from model to model? Would a 250's mirrors be the same as a 550?

    Also, any idea where to find an OEM replacement? I've looked on ebay and they seem to go for about $300-400 a mirror. I'm looking for one that's heated, powered, and has a turn signal. Ebay has some generic copies for about $150, not sure if they would match.

    I've never been to a U-Pull it type place, but do they generally stock such late model parts?

    And yes, somehow after years of putting the trucks away I manged to finally catch one and break it. Thankfully, it was only the most expensive one. :dizzy:

    Thanks in advance
    - Dan
  2. rb8484

    rb8484 Senior Member
    Messages: 419

    Well, if you are good about breaking mirrors, go with the aftermarket ones. I bought mine 2 years ago and have not had a single problem with them, I have power, heat, turn, and parking lights in mine. They fit real nice and you wouldnt even know they are not OEM. I took a gamble with the aftermarkets, and all has turned out well. Some will say to stay away from the aftermarkets, but like I said, i have not had a single problem with mine in the 2 years i have had mine.
  3. Dan85

    Dan85 Senior Member
    Messages: 670

  4. Pinky Demon

    Pinky Demon PlowSite.com Addict
    from Ohio
    Messages: 1,121

    I second that. I bought a set of the 03-07 Concave Heated, Lighted Towing mirrors and have not had a problem with them...yet. Only thing I have noticed is that they vibrate a bit more at speeds and I can't quite figure out how to adjust the blind spot mirror for optimal viewing angle yet.