1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

np 203 transfer case/shifter

Discussion in 'Chevy Trucks' started by larrymct, Nov 24, 2000.

  1. larrymct

    larrymct Junior Member
    Messages: 1

    My brother has a totally rebuilt 77 chevy side step. He cannot figure out how to get the shifter installed. We would greatly appreciate help from anyone who can assist. Thanks.
  2. Chuck Smith

    Chuck Smith 2000 Club Member
    from NJ
    Messages: 2,317

    E mail me. I have a diagram that should help you. I will send it to you as a jpg file.

  3. 3/4tonTodd

    3/4tonTodd Member
    Messages: 63


    I have a 76 K20 and in my cab, under the carpet, the center section of floor is just held in place with screws. I can just pull that up to get my shifter in and out.

    I have a different problem though - I assembled my shifter incorrectly and can't get it to work. See my post on that for more. And if you have any advice, I'd love to hear it!!

  4. Chuck Smith

    Chuck Smith 2000 Club Member
    from NJ
    Messages: 2,317

    I have no idea where I got this from ;)

    Too large to post here on Lawnsite. Well, I'll try it anyway, but don't blame me for how long it takes for this page to load here!

    <img src="http://www.chuckschevytruckpages.com/images/203shiftdiagram.jpg">

  5. mike reeh

    mike reeh Senior Member
    Messages: 114

    I have often wondered what would happen if I took apart the linkage on my spare np203.. I dont dare mess with it :) I also wondered if there was such a thing out there that tells how to assemble it but figured Id never see such a thing. That pic is something Ill definately be saving, for future reference.

    good work chuck :)