[Kingsmen20015]

Any thoughts on this. I tried to tighten the pivot bolt and I did put new springs on. The springs were an 1/2 in shorter then oem could this cause this much wear. Only plowed 1 storm with this plow i dont think it looked like this before but it's 2003 model from what boss said.

 

[johnhenry1933]

I'd say the top guide for the A Frame is bent down a little...unless the pivot is bent up a little. If you can persuade it up a smidge you probably won't be rubbing like that.

 

[Kingsmen20015]

I'd say the top guide for the A Frame is bent down a little...unless the pivot is bent up a little. If you can persuade it up a smidge you probably won't be rubbing like that.

Thank you. Also could this be caused by changing the plow angle when pushing snow? An any tips for persuading so i dont damage anything else lol. Thanks again.