1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

No Right Angle

Discussion in 'Meyer / Diamond Products Discussion' started by digger59, Dec 4, 2011.

  1. digger59

    digger59 Junior Member
    Messages: 3

    I have a Myer E47 plow. I have up, down and left angle but when I go to the right the plow angle back to the LEFT and pressure builds up in the hydraulic hose that comes from the right cylinder. Any ideas????
  2. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,980

    check to make sure the coupler is opening..could be a valve in the pump... the myers site has trouble shooting guides that may help
  3. digger59

    digger59 Junior Member
    Messages: 3

    Thanks for the quick reply and good input!!!

    I have checked and I am getting oil through there.

    I was thinking maybe the "C" coil/valve (I have magnetisim).

    Has anyone had to change out the "C" coil to get their plow to angle right????
  4. kimber750

    kimber750 PlowSite Veteran
    Messages: 4,681

    If you have magnetism it is most likely the C valve itself. C valve seems to be the most common one to fail.
  5. digger59

    digger59 Junior Member
    Messages: 3

    Thanks for the information!!!!
  6. TomsSnowPlowING

    TomsSnowPlowING Senior Member
    Messages: 253

    Like to know what was wrong. Subscribed Thread