1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

no power to joystick control

Discussion in 'Fisher Engineering Discussion' started by wing 97, Dec 20, 2008.

  1. wing 97

    wing 97 Junior Member
    from ct
    Messages: 21

    Not sure what to check next. After melting two solenoids in the middle of the "big" storm here in ct last night I attempted to use the one from my sander which had four poles of only three were being used (on the sander) during which I may have crossed the wires wires (in the dark in the storm) When went to try it not only did the plow not work but now the controller doesn't light up. So far I checked the fuse in the Fisher harness and the red wire thats tapped into the fuse panel has power. What now? Thanks in advance!