1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

no power to controller

Discussion in 'Truck & Equipment Repair' started by chevy914494, Nov 5, 2009.

  1. chevy914494

    chevy914494 Junior Member
    Messages: 9

    i got an older unimount on an 85 chevy 1/2 ton....i got no power to my joystick controller( led not on) its a 6 pin and is drivin my nuts. i checked to 6pin plug for power got nothing. i crossed the solenoid to make sure to pump ran and it did. any idea's?????
  2. chevy914494

    chevy914494 Junior Member
    Messages: 9

    scratch that....got that fixed....now when I try to go left, right or up i get no movement just a clickin sound from the pump area
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Double check the connection you just moved as well as those at the controller plug. If it's all good then check for 12V on the brown/red wire at the underhood solenoid while a helper holds the controller in the raise or angle left/right function.