1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Need Wiring Help!

Discussion in 'Truck & Equipment Repair' started by shiz1125, Dec 26, 2008.

  1. shiz1125

    shiz1125 Junior Member
    Messages: 6

    i just bought some new plow lights i got the Truck-Lite part # 80888, and i can't get the wiring down right to work... i got the gournd ( white ) all set, the yellow and black all set.... it's the ones coming from the switch tapping into the high and low beam wires... i have no clue what's going on.. i can get them to light up with the truck lights but flip the toggle switch and the truck ligths stay on plow lights out... any help would be appreciated i'm wiring up an 89 GMC sierra
  2. unimogr

    unimogr Senior Member
    Messages: 236

    I'll take a stab at it. The switch should have 6 slide on blade connectors? 2 top 2 center 2 bottom?

    Make sure the supply lines from your headlight switch are connected to the 2 center blades. Then the truck lights connect to bottom blades and aux. lights to top blades.
  3. kashman

    kashman PlowSite.com Addict
    Messages: 1,070

    im going with you didnt cut the hi low beam wire in half you taped them didnt you .You need 2 cut put i end on 1 wire other on wire on the other end
  4. shiz1125

    shiz1125 Junior Member
    Messages: 6

    kashman you rock, that solved the problem... i owe you a beer