1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Need Wiring Help!!

Discussion in 'Chevy Trucks' started by shiz1125, Dec 26, 2008.

  1. shiz1125

    shiz1125 Junior Member
    Messages: 6

    i just bought some new plow lights i got the Truck-Lite part # 80888, and i can't get the wiring down right to work... i got the gournd ( white ) all set, the yellow and black all set.... it's the ones coming from the switch tapping into the high and low beam wires... i have no clue what's going on.. i can get them to light up with the truck lights but flip the toggle switch and the truck ligths stay on plow lights out... any help would be appreciated i'm wiring up an 89 GMC sierra
  2. sechracer

    sechracer Senior Member
    Messages: 478

    Not overly sure what you are doing.... You wired them to share the power from the trucks main harness right? The toggle is for what exactly? If you are running them without the plows relay system, then just use a 3 way toggle and get power from an aux. port. That way, all you have to do is flip the switch and you have lights, while only turning the parking lights on on the truck.