1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

NEED HELP with wiring my Boss?

Discussion in 'Truck & Equipment Repair' started by seeden, Nov 16, 2010.

  1. seeden

    seeden Junior Member
    from 68130
    Messages: 1

    I have all the wiring installed and on my 2010 2500 Chevy. The controller light comes on. The lights work with the truck (inside and outside) I went to see if the plow works and when i connected the plow the ground wire started to burn. (it is connected to the battery ground) Have any ideas on how to fix it?

  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    1) Poor/loose/incorrect connections on any of the power cables including at the bumper connector and motor relay.
    2) Both power and ground cables not connected directly to the battery terminals.
    3) Cables on plow side connected backward.
    4) Shorted pump motor.
    5) Defective motor relay