1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Need help with whelen led hideaways

Discussion in 'Strobe Lighting' started by snorider075, Feb 24, 2011.

  1. snorider075

    snorider075 Senior Member
    Messages: 316

    I have whelen leds installed in the four corners of tail and head lights with linz6 on the running boards. My driverside rear light keeps going out of wack and changing patterns while everything else stays sync.Any ideas? Also my passenger side rear bulb is only lighting half of the bulb.. Any ideas on this? Thanks in advance guys!
  2. swtiih

    swtiih PlowSite.com Addict
    Messages: 1,179

    check all your connections to make sure they are correct.

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    The rear corner light that is out or wack is pry a ID number that is off. Dissocative would know for sure. He installs a ton of the vertex all the time.
  4. Dissociative

    Dissociative 2000 Club Member
    Messages: 2,066

    i am suspecting a scan lock wire that is touching ground or power...

    but without seeing the truck it's pretty hard as i have guessed at several problems only to see a easier one staring me in the face when i finally saw the truck. Bring it over i'm close.

    Sounds like a pair of vertex is in your future there.