1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

need help on mount height

Discussion in 'Meyer / Diamond Products Discussion' started by 992door, Jan 3, 2013.

  1. 992door

    992door Junior Member
    from NC
    Messages: 28

    We bought a diamond 7.5 ft plow bought it used. Need to know what the height from the ground to the plow mounting hole should be?
  2. .5racer

    .5racer Senior Member
    Messages: 132

    center line of pivot pin swhould be 10 1/2 " from the ground . i dont think + or - 1 " wouuld be a big factor . some one will correct if I"m wrong !!!
  3. tjctransport

    tjctransport PlowSite.com Addict
    Messages: 1,390

    10 1/2 to 12 inches will do just fine.
    with the plow on level surface, set the "A" frame level and measure the pins. this will give you an idea where you want to be. of coarse, cutting edge shape will make a difference in height, but as long as you keep the "A" frame close to level you will be ok.
  4. 992door

    992door Junior Member
    from NC
    Messages: 28