1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

need help on a e58h

Discussion in 'Meyer / Diamond Products Discussion' started by hortonguy, Jan 20, 2016.

  1. hortonguy

    hortonguy Junior Member
    Messages: 3

    I have a e-58h that will only move left no matter what function you hit. I have replaced the B solenoid but still no change. Once I move the plow straight manually and try move it in any direction the pump runs but the plow just goes left.:dizzy:
  2. Randall Ave

    Randall Ave PlowSite Veteran
    Messages: 3,602

    You checked for power to the valve magnets with a test light?
  3. hortonguy

    hortonguy Junior Member
    Messages: 3

    yes and there is power to them but here is the crazy part if I put a jumper wire with power to them they worked and the ow would move. I just solved the problem it was a poor ground. The ground was good enough to run the pump but not good enough to ground the pump and the soliniods cleaned the ground and all is good
  4. PLOWMAN45

    PLOWMAN45 2000 Club Member
    Messages: 2,951

    make sure to use dilectric grease as well
  5. hortonguy

    hortonguy Junior Member
    Messages: 3

    Will do thanks for the help