1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Need Help hooking pump back up

Discussion in 'Western Plows Discussion' started by chevyman51, Dec 3, 2012.

  1. chevyman51

    chevyman51 Senior Member
    Messages: 537

    I took my isamark 3 pump apart and un hooked the electrical wires and forgot to mark where they go. I know the where the 2 from the plug go but I need to know where the orange and black wire hooks up to? Any help would be greatly appreiciated.
  2. quigleysiding

    quigleysiding PlowSite.com Addict
    Messages: 1,129

  3. chevyman51

    chevyman51 Senior Member
    Messages: 537

    Thank you I looked for that on their website and could not find it. That is exactly what I needed
  4. mishnick

    mishnick 2000 Club Member
    Messages: 2,353

    Most of the time there is a sticker on the inside of the coil cover that shows where the wires go. Of course some times they fall off but have a look. It's handy whey you don't have your manual with you.
  5. chevyman51

    chevyman51 Senior Member
    Messages: 537

    Thanks for the info I will have to check there and see
  6. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,395

    usually westerns bk/og wire is the gnd