1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Need a measurement

Discussion in 'Boss Plows Discussion' started by Q101ATFD, Nov 14, 2007.

  1. Q101ATFD

    Q101ATFD Senior Member
    Messages: 277

    Hey -

    I need a measurement from the BOSS camp. I have a Blizzard and am going to start a project to upgrade my light tower. Could somebody get me a measurement for the (inside and outside) width of the two risers for the light tower on the newer (curved) style headlights? I need the distance between the two red pieces on the drawing here. Also, could you give me an approximate outside diameter of the curved bar on the top of the tower? Thanks in advance!

    Last edited: Nov 14, 2007
  2. Earthscapes

    Earthscapes Senior Member
    from WNY
    Messages: 577

    18 3/4" inside, 19" outside and the pipe is 2".
  3. DJ Contracting

    DJ Contracting PlowSite.com Addict
    Messages: 1,392

    Ok I just went and checked mine and the measurements come out to
    1. Inside 19"
    2. Outside 19" 1/2
    3. Tube 2"
    The brackets welded to the light tube are spaced at 19" 1/2 inches and bolt to the outside of the virtical brackets on mine anyway.
    Maybe some more boss owners could take measurements for you to see if the measurements vary much, hope this helps.
    Last edited: Nov 15, 2007

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    Be sure to post pics of your upgrade.
  5. Q101ATFD

    Q101ATFD Senior Member
    Messages: 277

    Thanks for the measurements guys - the numbers were not quite as wide as what I was hoping for, but maybe I can still make something work out of it...
    Last edited: Nov 15, 2007