1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

mounting a old plow on mm system

Discussion in 'Fisher Engineering Discussion' started by bob00, Oct 22, 2009.

  1. bob00

    bob00 Senior Member
    Messages: 143

    after few hour of serch and couple of phon call
    i can t find push plate kit for regular plow ( non mm or mm2 )

    i got tihs wonderful 8 ft hd blade and a good old chevy 1500 1988

    ther is my project fit it with a mm system

    so i need push plate kit
    and mm attachement part if anyone got these new or use post here or e-mail me at robert_r839@hotmail.com

    and if anyone have advise please let me know


  2. Nascar24

    Nascar24 Senior Member
    Messages: 645


    If you have the Fisher conventional Plow blade that has the channel iron A frame it is an easy rework.

    You need to get a piece of heavy angle iron and weld it across just in front of the mounting ears. then cut the old one out that should be 6-8" in front of it. Then box in the channel iron with some 5/16" or 3/8" thick plate 14-18" long. once done, paint and install. I have done this to several Fisher plows.