1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Mounting A frame to truck?

Discussion in 'Meyer / Diamond Products Discussion' started by rembrandt100, Dec 2, 2010.

  1. rembrandt100

    rembrandt100 Member
    Messages: 43

    Most of the meyer mounts have 3 holes for positioning the A frame to the truck. I have always used the middle hole for no other reason the because it seems stronger there than on the upper or lower ends. I do not see that the angle of the blade is that much different with either hole. So I guess my question is why do you use the mount hole that you use?

  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    You use whichever hole needed to make the A-frame as parallel as possible to the ground for the best performance, but just as importantly best cutting edge life. Run it too low and they scrap poorly, too high and it's tougher on edges.