1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

mount install pictures or help...

Discussion in 'Boss Plows Discussion' started by yasika116, Oct 28, 2011.

  1. yasika116

    yasika116 Junior Member
    Messages: 9

    i cant seem to figure out where my driver side upper mount bolts to on my 01 dodge does anyone have one mounted they can snap a picture of quick
  2. Deckscapes

    Deckscapes Senior Member
    Messages: 241

    It should mount up using a 2" u-bolt utilizing 2 existing holes in the truck's frame on the outside edge. Use a small flexible wire wrapped around one end of the u-bolt to help hold it so you don't drop it inside the frame channel
  3. ram_tough2001

    ram_tough2001 Senior Member
    Messages: 174

    on my dodge there was only 2 bolts on the main frame on the drivers side. there were 3 on the passenger side.
  4. yasika116

    yasika116 Junior Member
    Messages: 9

    found the installation manual on boss's site turns out i may have to drill a hole now i know why i couldnt see where to bolt it up. Thank you everyone appreciate your time