1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice


Discussion in 'Fisher Engineering Discussion' started by John58, Oct 28, 2014.

  1. John58

    John58 Junior Member
    Messages: 2

    Have a 2002? mm2 plow that i would like to mount on my 2010 ford f150. Need the push plates and wiring. Is this something i should tackle or send it to a dealer, Have a pretty good mechanical background, Thanks John
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,392

    I'd see if they even offer mounts for that trk and plow set up.
  3. kimber750

    kimber750 PlowSite Veteran
    Messages: 4,679

    Push plates should be 7188. The install really isn't that bad to do. Most of it is plug and play.
  4. johnmay19

    johnmay19 Junior Member
    Messages: 3

    If you can locate the parts, install yourself. Everything is pretty straight forward.
  5. John58

    John58 Junior Member
    Messages: 2

    Thanks for all your help, Going to see if we can get what we need,
  6. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,288

    I would tackle the job yourself.It will save you some money as well.Plus if you run into a problem there are plenty of us on here to help