1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM2 pump,motor seal part number?

Discussion in 'Fisher Engineering Discussion' started by Gmiller, Feb 8, 2012.

  1. Gmiller

    Gmiller Junior Member
    Messages: 14

    I filled up my reservoir thinking i was doing a good thing, starting the truck and moved the plow side to side and up and down several times. Went up to check the pump and it was leaking pink foam/fluid out where the 4 short bolts go up into the motor so i assume. I then noticed 3 of the bolts where completely gone so i found some that worked and tightened them in but its still leaking. Im thinking it has some sort of O-ring and it got pushed out so when i tightened it back up it got pinched and will continue to leak until i replace. Any ideas on what seal i need?

  2. Gmiller

    Gmiller Junior Member
    Messages: 14

    Found it,,,,,, Sorry