1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM2 motor replacement

Discussion in 'Truck & Equipment Repair' started by BratLAND, Dec 30, 2012.

  1. BratLAND

    BratLAND Junior Member
    Messages: 1

    One of our plows needs a new motor or a good cleaning. When we went to hook up to our ole faithful last night it stayed put. We began working on it immediately in hopes of getting it up. However like everything else the (2) 3/8 bolts holding on the motor snapped while removing them. They snapped all the way down the screw at the start of the threads, 95% of the screw is out. However the motor won't simply come off.....If anyone has any suggestions or prior experience in removing the motor in this type of situation would be appreciated. Before I start hitting it with a hammer I want to make sure that i won't damage the hydro pump! Any help would be appreciated.
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,390

    yea,,,its just stuck on there. they get siezed on the pump.