1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

mm2 attaching

Discussion in 'Fisher Engineering Discussion' started by plowman1984, Jan 2, 2010.

  1. plowman1984

    plowman1984 Member
    Messages: 63

    when driving the truck into the plow durning attaching, how far should the blade be pushed or is it even required to do it?
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    You don't NEED to push the blade. I usually do a few inches, to make sure both sides are pushed in tight. It helps to set the parking brake after driving into the plow to make sure the truck doesn't move back at all.
  3. plowinginma

    plowinginma Senior Member
    from MA
    Messages: 326

    The Key to hooking up a MM.. is to make sure the head gear tips a little forward.. When the frame is tight against the ears the head gear tips forward.. get out relase the pins and push the head gear up..Should just snap in.. The most common mistake when mounting a plow is the lift chain is to tight.. Preventing the pivot to lock the pins... Hope that helps..

    And +1 on pushing a couple inches.. Makes sure both sides are engaged..
  4. plowman1984

    plowman1984 Member
    Messages: 63

    thanks guys for the info, now i know what has to be done:waving: