1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM1 slow angle

Discussion in 'Fisher Engineering Discussion' started by highridge, Jan 1, 2010.

  1. highridge

    highridge Member
    Messages: 47

    I've got a MM1 7.5 SEHP. When the blade is fully raised or close to it, it takes forever or sometimes wont even angle. Once I lower the blade it works fine. Any ideas?

  2. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    lower blade and set float. then depress the lift triangle all the way.

    then check fluid level.

    sounds like low fluid level to me.

    i run live hydro so no other help from me. try the search button. lots of good info.
  3. plowinginma

    plowinginma Senior Member
    from MA
    Messages: 326

    +1 on the fluid level.. If it will angle when the plow is down that is it for sure..