MM1 SEHP Breather set-up?

Discussion in 'Fisher Engineering Discussion' started by FordFisherman, Jan 31, 2011.

  1. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,715

    Has anyone tried to put a breather set-up like on the insta act on a MM1 SEHP? Seems like there is always air trapped in the system. Theoretically it could work, no?
     
  2. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,452

    Interesting thought.....It would have to be on the same side as the fill plug, on the actual side, drill a hole in the actual reservoir and have some kind of setup inserted and secured....on second thought, it maybe strategically placed in the manifold for a specific reason....I don't know enough about it's routing to say one way or the other. I would think the internal ram might also play a part as well.
     
  3. justme-

    justme- 2000 Club Member
    Messages: 2,136

    There is air space in the res above the fluid so there's a place for trapped air to go- wouldn't a breather just add to the moisture in the fluid by letting air exchange bring humidity into the res and allow it to condense with thermal cycles?