1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM1 on 06. Wiring ?

Discussion in 'Fisher Engineering Discussion' started by coposrv, Sep 22, 2015.

  1. coposrv

    coposrv Junior Member
    Messages: 8

    I picked up a very lightly used mm1 last week. Looking to wire my truck. I already have a green label 3 port module 29070-1 and what I think is the correct headlight harness. The plow is currently. 2 plug sehp. I need to convert as well.

    What wiring part numbers do I need truck side that I don't already have? I went through e match and received limited info. Thanks guys.
  2. cwren2472

    cwren2472 Member
    Messages: 89

    What is the truck that you are trying to transfer it to?
  3. coposrv

    coposrv Junior Member
    Messages: 8

    The truck is an 06 f350 cc lariat powerstroke
  4. cwren2472

    cwren2472 Member
    Messages: 89

    Assuming the truck has H13 replaceable bulb headlights and
    that the only item you have is a module, you'll need:

    26345 3 pin veh side control harness
    5794 motor solenoid
    22511 battery to solenoid cable
    63411 power/ground cable
    29047 4 pin ctrl harness adapter
    29049 headlight adapter kit

    and for the plow side:

    26359 3 pin plow side control harness
    26347 11 pin plow side lighting harness

    You would also need a controller, either joystick (8292) or fish-stik (9400) if you don't have one already
  5. coposrv

    coposrv Junior Member
    Messages: 8

    Thanks for the help! I'll make a few calls this week and get this thing wired.